Item : BRACKET

Specification

-USE
The FPC and the connector are assembled to the bracket, used for connecting to the head stack signals coming from the PCB.

-FEATURE
Since this part is where the FPCB and the connector are coupled, it requires high-level precision without causing any burr.

-SIZE : 37 x 28 x 12 mm

Item : DISK DAMPER

Specification

-USE
Used for reducing noise by stabilizing the airflow generated while the disk is revolving or generated from the wind. Since this part requires high-strength materials, the quality of mass production cannot be met unless highly sophisticated mold design and manufacturing technologies are equipped. For the first time in Korea, the company succeeded in developing this part and began mass production. There are only few disk damper manufacturers around the world, including our company.

-SIZE : 112 x 70 x 4.75 mm

Item : HEAD RAMP

Specification

-USE
Designed to prevent abrupt power-off and protect the disk against external shocks by supporting the safe hard-disk parking function.

-SIZE : 43.5 x 16 x 3 mm

Item : LATCH

Specification

-USE
Used for anchoring the actuator; while the hard disk is not in operation, after the magnetic head is mounted in the ramp, as the actuator starts revolving by an external shock, the magnetic head bounces off into the recording zone and comes into contact with the recording surface, protecting the disk against scratches or preventing the magnetic head from being damaged.

-SIZE : 16 x 6 x 4 mm

Item : ODCS

Specification

-USE
Used for removing inhibiting factors while the latch revolves by eliminating contact between the latch and the HSA.

-SIZE : 6 x 3 x 2 mm

Item : Weight Balance 47mg

Specification

-USE
After the hard disk drive assembly is complete, if the center of the disk is off balance and the disk does not work parallel during test operation driving test, insert the W-Balance into the hole of the motor screw to adjust the balance of the disk.

-SIZE : 8.4 x 5.1 x 6.35 mm